BENIF by LX Hausys

BENIF architectural film by LX Hausys is a self-adhesive surface finish used to refinish suitable existing surfaces. The range includes realistic wood, stone, metal, solid-color, and specialty finishes for interior projects, plus a dedicated Outdoor range for approved exterior applications.

BENIF is intended for interior vertical and light-duty horizontal surfaces, including:

• Wall panels
• Doors and frames
• Casework and millwork
• Elevators and columns
• Retail fixtures and furniture

Final application suitability should be reviewed during design development.

Yes. BENIF is designed for commercial applications including hospitality, healthcare, workplace, retail, and multi-family environments.

When installed by certified installers, BENIF demonstrates strong resistance to wear, impact, and surface abrasion typical of high-traffic interior spaces.

Interior BENIF films are intended for suitable indoor surfaces and are not recommended for continuous water exposure. For exterior projects, explore the dedicated Outdoor range and confirm the selected film’s approved application with CASAMONTE.

BENIF may be applied to smooth, clean, stable, and non-porous substrates. Existing finishes must be sound, fully adhered, and properly prepared.

Yes. In many renovation scenarios, BENIF can be installed over existing substrates, reducing demolition and downtime. Substrate conditions must be evaluated prior to installation.

Yes. Physical samples and/or site mock-ups are strongly recommended for approval prior to final specification. Contact CASAMONTE for help with sample selection and project requirements.

Installation must be performed by a BENIF-certified installer.

Certified installers are trained in BENIF-specific application techniques, detailing, and surface preparation to ensure proper adhesion, appearance, and long-term performance.

No. Installation by a non-certified installer is not recommended and voids the factory warranty. There is no limited warranty when non-certified installers are used.

Yes. BENIF maintains a network of certified installers and can provide referrals during the specification and bidding process. Contact CASAMONTE for installer guidance.

BENIF offers a broad range of finishes, including:

• Natural wood grains
• Stone and concrete aesthetics
• Metallic finishes
• Solid colors and specialty textures

Custom designs may be available subject to project scope, lead times, and minimum quantities.

BENIF requires routine cleaning using mild, non-abrasive cleaners and soft cloths. Abrasive tools and harsh chemicals should be avoided.

Yes. BENIF can be professionally removed or replaced, allowing design updates without full material replacement.

BENIF includes a factory warranty when:

• Installed by a BENIF-certified installer
• Installed over approved substrates
• Used in accordance with product guidelines

The warranty is void if:

• Installation is performed by a non-certified installer
• Substrate conditions are unsuitable or improperly prepared
• Product is used outside the conditions specified for the selected film

BENIF offers reduced installation time, minimal disruption to occupied spaces, and cost efficiencies compared to full material replacement.